Collection: Stainless Steel Pre-Swaged Wire Balustrade Kits

Pre swaged DIY Kit for Balustrading

These kits are so easy to install.

We have sold 1000's of these kits and our feedback highlights our track record for 100% accuracy and efficiency.

Kit Includes:
2 x 5mm Saddles
4 x Stainless Screws or Pop-Rivets (you tell us which you need)
1 x 3mm Jaw/Swage Rigging Screw
1 x 3mm Fork Terminal Swage
Hydraulic Swaging of the fittings to the wire

At one end you will use:
1 x Saddle
2 x Stainless Screws
1 x Jaw/Swage Rigging Screw (to tension the wire)

At the other end:
1 x 5mm Saddle
2 x Stainless Screws
1 x Fork Terminal Swage

The rigging screw can be pulled apart to feed them through any centre posts. You will need to drill 8mm holes through the center posts.

The price includes the cutting and swaging to the wire. Upon purchasing this item you will need to provide the lengths and quantities of the runs. The lengths will need to be the inside to inside of the end posts. It is important that these measurements are accurate and that you do not move your posts once your order has been placed.

We will do the rest. We will cut the wire to length and hydraulically swage the fittings to the wire.

You will also need to purchase the wire to go with these kits. To calculate the wire required multiply the quantity required by the length of the wire. Eg:
11 x 1554 = 17094
11 x 2459 = 27049
11 x 5654 = 62194
Total wire = 106 meters

You will also need to type the lengths and quantities required into the comments section during the checkout process

Kit Includes:
2 x 6mm Lag Screws
1 x M5 Jaw/Swage Rigging Screw
1 x 3mm Fork Terminal Swage
Hydraulic Swaging of the fittings to the wire

At one end you will use:
1 x Lag Screw
1 x Jaw/Swage Rigging Screw (to tension the wire)

At the other end:
1 x Lag Screw
1 x Fork Terminal Swage

The rigging screw can be pulled apart to feed them through any centre posts. You will need to drill 8mm holes through the center posts. The end posts will require a 3mm pilot hole for soft wood or 4mm for hard wood.

The price includes the cutting and swaging to the wire. Upon purchasing this item you will need to provide the lengths and quantities of the runs. The lengths will need to be the inside to inside of the end posts. It is important that these measurements are accurate and that you do not move your posts once your order has been placed.

We will do the rest. We will cut the wire to length and hydraulically swage the fittings to the wire.

You will also need to purchase the wire to go with these kits. To calculate the wire required multiply the quantity required by the length of the wire. Eg:
11 x 1554 = 17094
11 x 2459 = 27049
11 x 5654 = 62194
Total wire = 106 meters

You will also need to type the lengths and quantities required into the comments section during the checkout process

If you are not sure how many wires/kits you require see our Balustrade Regulations page for more information.

Diameter: 3.2mm
Lay: 1x19 (19 individual strands)
Grade: 316 (Marine Grade) Stainless Steel
Quantity: 1 metre - Purchase multiple metres by entering in number in the quantity field. You will receive 1 continuous length
Breaking Strain: 848kg

Diameter: 3.2mm
Lay: 1x19 (19 individual strands)
Grade: 316 (Marine Grade) Stainless Steel
Quantity: 305m Roll
Breaking Strain: 848kg
Weight: 15.9kg

Split Grommets
Suitable for 3.2mm or 4mm wire
Fits into an 8.5mm Hole
Suitable for steel or timber

This simple to use spanner will make tightening your M5 Rigging Screws a breeze. Suitable for both M5 Jaw/Jaw Rigging Screws and Jaw/Swage Rigging Screws

Use: Centre Post
Length: 960mm
Width: 50mm
Thickness: 10mm
Grade: 316
Finish: Mirror
Holes: 11 (8mm) Holes at 80mm Centres