Collection: Stainless Steel Pre-Swaged Wire Balustrade Kits

Pre-swaged kits (ready-made balustrade wires) come pre-cut to the required length, with the fittings hydraulically pressed (swaged) onto the ends of the wire. These kits are the easiest to use, as no special tools are needed. When purchasing this type of kit, we’ll need the inside-to-inside measurements of your two end posts. You can still pass the wire through any center posts by drilling an 8mm hole.

We recommend using Pre-Swaged Kits with saddles for steel posts and Pre-Swaged Kits with lag screws for timber posts.

Each wire will be approximately plus and minus 30mm of adjustment from the length provide. If your posts are not perfectly vertical, please provide the average length for us to customize the wires.

Please note that you will need to purchase the wire separately from the kit. To calculate the total wire required, multiply the number of wires by the length of each wire. For example:

• 11 x 1554 = 17,094mm (17.094 meters)
• 11 x 2459 = 27,049mm (27.049 meters)
• 11 x 5654 = 62,194mm (62.194 meters)
• Total wire required = 106 meters

During checkout, please type the required lengths and quantities in the comments section.

For more details about each kit, make sure to click on the product information link.