Stainless Fork Terminals

Stainless Fork Terminals are classed as Hydraulic Fittings and as such will require the use of a Hydraulic Swaging Tool to press the fittings onto the wire.

With a Hydraulic fitting the wire is inserted into a barrel in the fitting and the fittings is then pressed (swaged) to the wire.

Should you wish to use Hydraulic fittings but not have access to a Hydraulic Swaging tool we can make your wires up to the required length for you. We only charge $2 per fitting so usually $4 per wire required. To do this we will required accurate measurements from post to post.