Collection: Hand Swaged Balustrade Kits

Kit Includes 
2 x Saddles
4 x Stainless Screws or Pop-Rivets
1 x 5mm Eye/Eye Turnbuckle
2 x 3mm Thimble and Ferrule (swage)

All you need to add is 3.2mm 7x7 wire rope and you have everything you will need to build a stylish new Stainless Wire Rope Balustrade.

At one end you will use: 
1 x Saddle
2 x Screws or Pop-Rivets
1 x Thimble and Ferrule

At the other end:
1 x Saddle
2 x Screws or Pop-Rivets
1 x Thimble and Ferrule
1 x Eye/Eye Turnbuckle (to tension the wire)

If you are not sure how many wires/kits you require see our Balustrade Regulations page for more information.

Kit Includes 
2 x Saddles
4 x Stainless Screws or Pop-Rivets
1 x 5mm Hook/Eye Turnbuckle
2 x 3mm Thimble and Ferrule (swage)

All you need to add is 3.2mm wire rope and you have everything you will need to build a stylish new Stainless Wire Rope Balustrade.

At one end you will use:
1 x Saddle
2 x Screws or Pop-Rivets
1 x Thimble and Ferrule

At the other end:
1 x Saddle
2 x Screws or Pop-Rivets
1 x Thimble and Ferrule
1 x Hook/Eye Turnbuckle (to tension the wire)

If you are not sure how many wires/kits you require see our Balustrade Regulations page for more information.

This is a great DIY kit that can be used with timber posts. The lag screw, in conjunction with the jaw/jaw rigging screw, gives you a nice streamline finish. It is easy to install with the only tools required being a drill, a 3mm and 4mm drill piece, a small shifter and a hand swaging tool. Wire cutters could also be handy but a sharp pair of pliers or tin snips will do.

Kit Includes:
2 x 6mm Lag Screws
1 x Jaw/Jaw Rigging Screw
2 x 3mm Thimble and Ferrule (swage)

At one end you will use:
1 x Lag Screw
1 x Thimble and Ferrule

At the other end:
1 x Lag Screw
1 x Thimble and Ferrule
1 x Jaw/Jaw Rigging Screw (to tension the wire)

Use 7x7 3.2mm Stainless Steel wire with this kit 

If you are not sure how many wires/kits you require see our Balustrade Regulations page for more information.

These kits are perfect for anyone who is building a balustrade that is using timber or steel posts. They are easy to install and require little to no prior experience.

Kit Includes
2 x Saddles
4 x Stainless Screws
1 x Jaw/Jaw Rigging Screw
2 x 3mm Thimble
2 x 3mm Ferrule (swage)

At one end you will use:
1 x Saddle
2 x Screws
1 x Thimble and Ferrule

At the other end:
1 x Saddle
2 x Screws
1 x Thimble and Ferrule
1 x Jaw/Jaw Rigging Screw (to tension the wire)

If you are not sure how many wires/kits you require see our Balustrade Regulations page for more information.

Common uses for this wire include:

• Balustrading
• Plant trainers
• Clothes lines
• Dog runs
• Shade Sails

This is the most common wire used for DIY balustrading. It is a semi-flexible wire and is suitable for use with Thimble and Ferrule fittings as well as hydraulically swaged fittings.

The 7x7 indicates that strand of the wire. It is actually made from 7 thin wires twisted together then 7 of these twisted. In total there are 49 individual strands twisted to make the one strand of wire.

Diameter: 3.2mm
Lay: 7x7 (49 individual strands)
Grade: 316 (Marine Grade) Stainless Steel
Quantity: 305m Roll
Breaking Strain: 710kg
Weight: 13.1kg

This simple to use spanner will make tightening your M5 Rigging Screws a breeze. Suitable for both M5 Jaw/Jaw Rigging Screws and Jaw/Swage Rigging Screws

Split Grommets
Suitable for 3.2mm or 4mm wire
Fits into an 8.5mm Hole
Suitable for steel or timber

Use: Centre Post
Length: 960mm
Width: 50mm
Thickness: 10mm
Grade: 316
Finish: Mirror
Holes: 11 (8mm) Holes at 80mm Centres