Collection: Balustrading-Rigging

Diameter: 1.6mm
Lay: 1x19 (19 individual strands)
Grade: 316 (Marine Grade)
Quantity: 1 metre - Purchase multiple metres by entering in number in the quantity field. You will receive 1 continuous length
Breaking Strain: 182kg

Used with 1 Inch tube.
Can be Welded, Pop Riveted or Glued to the tube.

Split Grommets
Suitable for 3.2mm or 4mm wire
Fits into an 8.5mm Hole
Suitable for steel or timber

Used with 2 Inch tube.

Can be Welded, Pop Riveted or Glued to the tube.

Pre swaged DIY Kit for Balustrading

These kits are so easy to install.

We have sold 1000's of these kits and our feedback highlights our track record for 100% accuracy and efficiency.

Kit Includes:
2 x 5mm Saddles
4 x Stainless Screws or Pop-Rivets (you tell us which you need)
1 x 3mm Jaw/Swage Rigging Screw
1 x 3mm Fork Terminal Swage
Hydraulic Swaging of the fittings to the wire

At one end you will use:
1 x Saddle
2 x Stainless Screws
1 x Jaw/Swage Rigging Screw (to tension the wire)

At the other end:
1 x 5mm Saddle
2 x Stainless Screws
1 x Fork Terminal Swage

The rigging screw can be pulled apart to feed them through any centre posts. You will need to drill 8mm holes through the center posts.

The price includes the cutting and swaging to the wire. Upon purchasing this item you will need to provide the lengths and quantities of the runs. The lengths will need to be the inside to inside of the end posts. It is important that these measurements are accurate and that you do not move your posts once your order has been placed.

We will do the rest. We will cut the wire to length and hydraulically swage the fittings to the wire.

You will also need to purchase the wire to go with these kits. To calculate the wire required multiply the quantity required by the length of the wire. Eg:
11 x 1554 = 17094
11 x 2459 = 27049
11 x 5654 = 62194
Total wire = 106 meters

You will also need to type the lengths and quantities required into the comments section during the checkout process

These kits are perfect for anyone who is building a balustrade that is using timber or steel posts. They are easy to install and require little to no prior experience.

Kit Includes
2 x Saddles
4 x Stainless Screws
1 x Jaw/Jaw Rigging Screw
2 x 3mm Thimble
2 x 3mm Ferrule (swage)

At one end you will use:
1 x Saddle
2 x Screws
1 x Thimble and Ferrule

At the other end:
1 x Saddle
2 x Screws
1 x Thimble and Ferrule
1 x Jaw/Jaw Rigging Screw (to tension the wire)

If you are not sure how many wires/kits you require see our Balustrade Regulations page for more information.

Diameter: 2.5mm
Lay: 7x7 (49 individual strands)
Grade: 316 (Marine Grade) Stainless Steel
Quantity: 1 metre - Purchase multiple metres by entering in number in the quantity field. You will receive 1 continuous length
Breaking Strain: 345kg

M6x30mm Eye Screw

Use: Centre Post
Length: 960mm
Width: 50mm
Thickness: 10mm
Grade: 316
Finish: Mirror
Holes: 11 (8mm) Holes at 80mm Centres

Ferrule Swage to Suit 1.2mm Wire