Pre-Swaged - DIY Kit with Saddles

These kits are so easy to use.

We have sold 1000's of these kits and our feedback highlights our track record for 100% accuracy and efficency.

Kit Includes:
2 x 5mm Saddles
4 x Stainless Screws or Pop-Rivets (you tell us which you need)
1 x 3mm Jaw/Swage Rigging Screw
1 x 3mm Fork Terminal Swage
Hydralic Swaging of the fittings to the wire

At one end you will use:
1 x Saddle
2 x Stainless Screws
1 x Jaw/Swage Rigging Screw (to tension the wire)

At the other end:
1 x 5mm Saddle
2 x Stainless Screws
1 x Fork Terminal Swage

The rigging screw can be pulled apart to feed them through any centre posts. You will need to drill 8mm holes through the center posts.

The price includes the cutting and swaging to the wire. Upon purcasing this item you will need to provide the lengths and quantities of the runs. The lengths will need to be the inside to inside of the end posts. It is important that these measurements are accurate and that you do not move your posts once your order has been placed.

We will do the rest. We will cut the wire to length and hydralically swage the fittings to the wire.

You will also need to purchase the wire to go with these kits. To calculate the wire required multiply the quantity required by the length of the wire. Eg:
11 x 1554 = 17094
11 x 2459 = 27049
11 x 5654 = 62194
Total wire = 106 meters

You will also need to type the lengths and quantities required into the comments section during the checkout process

You may also be interested in this/these product(s):

316: 3.2mm 1x19 Wire Rope - Per Metre $1.65 $1.30 You Save: $0.35 Add to Cart

Pre-Swaged - DIY Kit with Lag Screws $16.60 $14.80 You Save: $1.80 Add to Cart

316: 3.2mm 1x19 Wire Rope - 305 Metre Roll $476.95 $360.00 You Save: $116.95 Add to Cart

C Spanner for M5 Rigging Screws $16.55 $9.50 You Save: $7.05 Add to Cart